Question
Download Solution PDFAdditional longitudinal reinforcement is provided at faces if depth of member subjected to torsion exceeds _______ mm.
Answer (Detailed Solution Below)
Detailed Solution
Download Solution PDFExplanation:
According to IS 456:2000 Clause 26.5.1.7
Distribution of torsion Reinforcement
- The transverse reinforcement for torsion shall be rectangular closed stirrups placed perpendicular to the axis of the member.
- The spacing of the stirrup shall not exceed the least of x1, (x1 + y1)/4 and 300 mm where x1, y1 are respectively short and long dimensions of the stirrup
- Longitudinal reinforcement shall be placed as close as is practicable to the corners of the cross-section and in all cases, there shall be at least one Longitudinal bar each corner of the ties.
When the cross-sectional dimension of the member exceeds 450 mm, additional longitudinal bars. shall be provided to satisfy the requirement of minimum reinforcement and spacing.
Last updated on Jul 1, 2025
-> JKSSB Junior Engineer recruitment exam date 2025 for Civil and Electrical Engineering has been rescheduled on its official website.
-> JKSSB JE exam will be conducted on 31st August (Civil), and on 24th August 2025 (Electrical).
-> JKSSB JE application form correction facility has been started. Candidates can make corrections in the JKSSB recruitment 2025 form from June 23 to 27.
-> JKSSB JE recruitment 2025 notification has been released for Civil Engineering.
-> A total of 508 vacancies has been announced for JKSSB JE Civil Engineering recruitment 2025.
-> JKSSB JE Online Application form will be activated from 18th May 2025 to 16th June 2025
-> Candidates who are preparing for the exam can access the JKSSB JE syllabus PDF from official website of JKSSB.
-> The candidates can check the JKSSB JE Previous Year Papers to understand the difficulty level of the exam.
-> Candidates also attempt the JKSSB JE Mock Test which gives you an experience of the actual exam.