English
Hindi

Question

Download Solution PDF

If the response of LTI continuous time system to unit step input is , then impulse response of the system is

This question was previously asked in
ESE Electronics 2010 Paper 1: Official Paper
Attempt in App
View all UPSC IES Papers >
  4. Constant

Answer (Detailed Solution Below)

Option 2 :
Free Tests
View all Free tests >
Free
ST 1: UPSC ESE (IES) Civil - Building Materials
20 Qs. 40 Marks 24 Mins
Start Now

Detailed Solution

Download Solution PDF

Concept:

A transfer function is defined as the ratio of the Laplace transform of the output to the Laplace transform of the input by assuming initial conditions are zero.

TF = L[output]/L[input]

For unit impulse input i.e. r(t) = δ(t)

⇒ R(s) = δ(s) = 1

Now transfer function = C(s)

Therefore, the transfer function is also known as the impulse response of the system.

Transfer function = L[IR]

IR = L-1 [TF]

Analyses:-

= e-2t

Download Solution PDF
Latest UPSC IES Updates

Last updated on Jul 2, 2025

-> ESE Mains 2025 exam date has been released. As per the schedule, UPSC IES Mains exam 2025 will be conducted on August 10. 

-> UPSC ESE result 2025 has been released. Candidates can download the ESE prelims result PDF from here.

->  UPSC ESE admit card 2025 for the prelims exam has been released. 

-> The UPSC IES Prelims 2025 will be held on 8th June 2025.

-> The selection process includes a Prelims and a Mains Examination, followed by a Personality Test/Interview.

-> Candidates should attempt the UPSC IES mock tests to increase their efficiency. The UPSC IES previous year papers can be downloaded here.

Exams Tests Super Practice

More Time Response of the First and Second Order System Questions

Q1.A second-order system has a transfer function given by \(G(s)=\frac{25}{s^2+8 s+25}\). If the system, initially at rest, is subjected to a unit-step input at t = 0, the second peak in the response will occur at
Q2.The impulse response of e-3t is :
Q3.The unit step response of a system is [1 − e−t(1 + t)] u(t). The system is
Q4.Response of the first order system subjected to unit step input is given by -
Q5.The impulse response of an LTI system is given as : \(\rm {h[n] = \left\{ \begin{matrix} \frac{\omega_c}{\pi} & n = 0 \\\ \frac{\sin \omega_c n}{\pi n} & n \ne 0 \end{matrix} \right.}\) It represents an ideal
Q6.The impulse response of a system is h(t) = t u(t) . For an input u(t - 1) , the output is
Q7.In control systems, if 'G' is the gain then Damping varies with:
Q8.Two discrete time systems with impulse responses ht[n] = δ[n - 1] and h2[n] = δ[n - 2]  are connected in cascade. The overall impulse response of the cascaded system is
Q9.Direction: Question consists of two statements, one labelled as the 'Assertion (A)' and the other as 'Reason (R)'. Examine these two statements carefully and select the answer to this question using the codes given below: Assertion (A): A linear system gives a bounded output if the input is bounded. Reason (R): The roots of the characteristic equation have all negative real parts and the response due to initial conditions decay to zero as time t tends to infinity.
Q10.If the response of LTI continuous time system to unit step input is \(\left( {\frac{1}{2} - \frac{1}{2}{e^{ - 2t}}} \right)\), then impulse response of the system is

More Time Response Analysis Questions

Q1.A unity feedback system is characterized by the open-loop transfer function \(G(s)=\frac{100}{s(5 s+10)(2 s+10)}\) The steady-state errors for unit-step and unit-ramp inputs are :
Q2.In the circuit shown switch is closed at t = 0. The time constant of the circuit is :
Q3.Consider a causal second-order system with the transfer function \(G(s)=\frac{1}{s^2+2 s+1}\) with a unit-step \(R(s)=\frac{1}{s}\) as an input. Let c(s) be the corresponding output. The time taken by the system output c(t) to reach 94% of its steady-state value \(\displaystyle \lim _{t \rightarrow \infty} c(t)\), rounded off to two decimal places, is
Q4.The output of a standard second-order system for a unit-step input is given as \(y(t)=1-\frac{2}{\sqrt{3}} e^{-t} \cos \left(\sqrt{3} t-\frac{\pi}{6}\right)\). What is the transfer function of the system?
Q5.A second-order system has a closed-loop transfer function given by \(G(s)=\frac{25}{s^2+8 s+25}\). The settling time for 5 percentage band in tolerance error is
Q6.A second-order system has a transfer function given by \(G(s)=\frac{25}{s^2+8 s+25}\). If the system, initially at rest, is subjected to a unit-step input at t = 0, the second peak in the response will occur at
Q7.Steady state error is the value of error signal when:
Q8.A closed loop system is shown in the figure where k > 0 and α > 0. The steady state error due to a ramp input (R(s) = α/s2) is given by 
Q9.The nature of the response shown below is:
Q10.When the damping ratio ζ (zeta) lies in between 0 < ζ < 1, then the circuit classification comes under:
Suggested Test Series
View All >
UPSC ESE (IES) Civil Mock Test Series
116 Total Tests with 1 Free Tests
Start Free Test
UPSC ESE (IES) Electrical Mock Test Series
68 Total Tests with   0 Free Tests
Start Free Test

UPSC IES Important Links

ResultHall TicketEligibilitySalary and Job ProfileExam PatternECE Syllabus

More Control Systems Questions

Q1.A unity feedback system is characterized by the open-loop transfer function \(G(s)=\frac{100}{s(5 s+10)(2 s+10)}\) The steady-state errors for unit-step and unit-ramp inputs are :
Q2.In the circuit shown switch is closed at t = 0. The time constant of the circuit is :
Q3.The loop transfer function of a closed-loop control system is given as : \(G(s) H(s)=\frac{k(s+1)}{s(s+2)(s+3)}\) The centroid of the asymptotes in root locus is :
Q4.For a control system having fourteen poles and two zeros, the slope in its magnitude plot for high frequency asymptote will be :
Q5.The Routh Array is as below : \(\begin{array}{lllll} \mathrm{S}^{6} & 1 & 8 & 20 & 16 \\ \mathrm{S}^{5} & 2 & 12 & 16 & \\ \mathrm{S}^{4} & 2 & 12 & 16 & \\ \mathrm{S}^{3} & 0 & 0 & & \end{array}\) The row of zero of this array will be replaced by coefficients of 
Q6.The number of roots in the left half of the s-plane for a system having characteristic equations : s3 + 5s2 + 7s + 3 = 0 is : 
Q7.Explain the pattern and trend of public expenditure on social services in the post reforms period in India. To what extent this has been in consonance with achieving objective of inclusive growth? 
Q8.The Nyquist criterion for stability states that an amplifier is unstable if the Nyquist curve encloses the -1 + j0 point, and the amplifier is stable if the curve does not enclose this point. If Aβ
Q9.The phase margin of a system with the open-loop transfer function \(G(s) H(s)=\frac{1-s}{(s+1)(s+2)}\) is
Q10.The phase margin of a system having the loop transfer function \(G(s) H(s)=\frac{2 \sqrt{3}}{s(s+1)}\) is
Testbook Edu Solutions Pvt. Ltd.
1st & 2nd Floor, Zion Building,
Plot No. 273, Sector 10, Kharghar,
Navi Mumbai - 410210
support@testbook.com
Toll Free:1800 833 0800
Office Hours: 10 AM to 7 PM (all 7 days)
Company
About usCareers We are hiringTeach Online on TestbookPartnersMediaSitemap
Products
Test SeriesTestbook PassOnline CoursesOnline VideosPracticeBlogRefer & EarnBooks
Copyright © 2014-2022 Testbook Edu Solutions Pvt. Ltd.: All rights reserved
User PolicyTermsPrivacy
Hot Links： teen patti plus yono teen patti teen patti all app teen patti master downloadable content lotus teen patti